Fiat Barchetta
The Fiat Barchetta is a roadster produced by Fiat from 1995 to 2005. Barchetta in Italian means “little boat”, and also denotes a type of open-top sports car body style.
Vehicle Overview
The Fiat Barchetta is a roadster produced by the Italian automaker Fiat from 1994 to 2005, marking Fiat’s return to the sports car segment after a long absence. The design of the Barchetta, often written in lowercase by enthusiasts, was created by Greek designer Andreas Zapatinas. He drew inspiration from the Ferrari 166 MM in his initial sketches, made in 1990, and led the project until 1993, when he was replaced by Alessandro Cavazza, who guided the car into production. The Barchetta was built on the shortened platform of the Fiat Punto and was equipped with a 1.747 cm³ 16V engine from the Pratola Serra modular family, producing 130 horsepower at 6,300 RPM. This engine, shared with the Fiat Coupé and the Punto HGT, featured a variable valve timing system (VFD) on the intake camshaft, optimizing torque and performance at different engine speeds. This allowed the Barchetta to accelerate from 0 to 100 km/h in under 9 seconds and reach a top speed of over 200 km/h. In 1999, the engine underwent a technical update without much public announcement. The new “Step 2” version featured a Hitachi micro-hybrid ECU and a variable intake system (V.I.S.), which improved response without increasing emissions. In 2001, the Barchetta was further updated to comply with Euro 3 emissions standards, adding a pre-catalytic converter and electronic throttle control. A unique aspect of the Fiat Barchetta is that prototyping was carried out by Stola and its final assembly was handled by Maggiora at the former Lancia factory in Chivasso. Maggiora was responsible for assembling components that were produced at various locations: the chassis was made by ILCAS, the painting was done by Carrozzeria Bertone, and the engines were built at Fiat’s Pratola Serra plant before being sent to Chivasso for final assembly. When Maggiora went bankrupt in 2002, production was halted, but it resumed in 2003 at Fiat’s Mirafiori plant. The Barchetta featured advanced safety systems, including airbags, side impact bars in the doors, and a reinforced body with a deformation-controlled structure. Its braking system had a dual-circuit setup with a short-stroke brake booster, making it highly efficient for sporty driving. ABS was available on some versions. Approximately 57,791 units of the Fiat Barchetta were produced, with the car debuting at the Geneva Motor Show in 1995. Production ended definitively in June 2005. In 1996 Maggiora made a Coupé Prototype and a prototype for a second generation was created by Carrozzeria Bertone in 2007, but it never reached production.
VIDEO
Technical Specifications
-
Body
-
Year1994
-
MakeFiat
-
ModelBarchetta
-
CoachbuilderMaggiora
-
Length (mm)N/A
-
Width (mm)N/A
-
Height (mm)N/A
-
Units builtN/A
-
Engine TypeN/A
-
DesignerAndreas Zapatinas
-
MakeN/A
-
ModelN/A
-
Cylinder CapacityN/A
-
Number Of DoorsN/A
-
Six Month RateN/A
-
Twelve Month RateN/A
-
Date Of First RegistrationN/A
-
Year Of ManufactureN/A
-
CO2 EmissionsN/A
-
Fuel TypeN/A
-
Tax StatusN/A
-
TransmissionN/A
-
ColourN/A
-
Type ApprovalN/A
-
Wheel PlanN/A
-
Revenue WeightN/A
-
Tax DetailsN/A
-
Mot DetailsN/A
-
TaxedN/A
-
motN/A
-
MakeN/A
-
Cylinder CapacityN/A
-
RegistrationN/A
-
Year Of ManufactureN/A
-
CO2 MissionsN/A
-
Fuel TypeN/A
-
Tax StatusN/A
-
ColourN/A
-
Type ApprovalN/A
-
Wheel PlanN/A
-
Revenue WeightN/A
Events
Subscribe
Login
Please login to comment
0 Comments
Oldest
Coachbuilder
